LONG-LIVING
Durable solid-state induction technology
Long-life combustion tubes
INNOVATIVE
Feeds the sample from the top
Smart guided gas flow
CLEAN
Minimum of dust and debris formation
HIGH-THROUGHPUT
Fully automated with
up to 89 position autosampler
WORKHORSE
Optimized for secure and
unattended 24/7 operation
EASY TO USE
Intuitive and multi-language software
Easy accessible components
Tool-free maintenance
완전히 새롭게 설계된 이 금속 또는 세라믹 재료용 고정밀 CS 분석기에는 최신 기술들이 적용되었습니다. 장수명 고체 고주파 유도로가 장착되어 최대 2000°C의 샘플 온도에 도달할 수 있습니다. 옵션 카메라를 사용하면 작업자가 실시간으로 가스 방출을 관찰할 수 있습니다. 성분 검출에도 첨단 기술이 사용됩니다. 탄소와 황 모두 광범위 IR 검출기에 의해 모든 농도 범위에 결쳐 분석됩니다. 따라서 ppm 단위의 불순물이나 수 퍼센트에 이르는 농도도 검출할 수 있습니다.
기기 상부에 가스 공급 시스템과 지능형 가스 플로우 제어 시스템을 갖춘 혁신적인 설계로 먼지와 이물질을 최소화합니다. 이를 통해 전체 장치가 높은 정돈 상태를 유지할 수 있으므로 지루한 세척 작업이 불필요합니다. 특별한 도구 없이 수행할 수 있는 유지보수와 직관적인 다국어 소프트웨어와 함께 inductor CS cube는 정말 사용하기 쉽습니다. 또한 옵션인 89 위치 자동 샘플러를 사용하면 완전 자동화되어 높은 분석 처리량 제공합니다. 높은 정밀도, 최대의 사용자 편의성 및 연중무휴 작동 시 최대의 견고성으로 인해 inductor CS cube는 정교한 R&D 프로젝트 및 일상적인 작동에 대한 모든 요구사항을 충족합니다. 하나의 동일한 장치로 최대 5개의 성분까지 분석하고자 하는 사용자들은 언제든지 inductor CS cube를 inductor EL cube로 업그레이드할 수 있습니다.
The inductar CS cube is optimized for simultaneous carbon- and sulfur analysis.
We offer an automated version with 89 sample positions as well as a manual version with 2 sample positions.
Measuring method
High-temperature-combustion in oxygen atmosphere at up to 2000 °C, followed by purification of the analytical gas flow and subsequent gas analysis. CS-analysis is done according to ISO 15350, ASTM E1019 and further international standards.
Easy sample preparation and handling
Without any special sample preparation, all kinds of solid samples are weighed into ceramic sample containers (sample mass up to 1 g).
Clean and safe analysis
The innovative crucible design, together with top-down oxygen gas stream, minimizes any dust inside the system. Furthermore spattering of sample melt is prevented, which assures a virtually unlimited lifetime of the combustion tube.
Large concentration range
From a few ppm up to 100 % or 60 mg carbon and 5 mg sulfur absolute.
Linear single/multipoint-calibration
The operator is guided through the calibration by an intuitive calibration assistant. The transparently calculated calibration is editable and storable. Furthermore, templates can be stored for future calibrations. Calibration is linear and stable for months.
Few operational requirements
1 m laboratory working space, one electrical connection and one operating gas are sufficient for long term operation.
Fully automatic
Automated and unattended operation is possible by the integrated 89 sample changer and PC-control through Windows®. Furthermore, optional 21 CFR Part 11 compliant software is available.
Optical camera:
An optical camera is available for observation of the combustion process.
Electronic analytical balance:
The balance and elemental analyzer form a system.
We offer convenient analytical balances from the leading manufacturers with our instruments.
Lab furnace:
We recommend preheating the ceramic crucibles prior to combustion analysis, as for low carbon concentrations really clean, carbon-free crucibles are needed. For this preheating step we offer several lab furnaces from leading manufacturers.
Halogen trap:
Halogens from halogen containing samples have a major influence on the quantitative detection of carbon and sulfur. Thus, Elementar optional offers halogen traps for chlorine (intrap-Cl) and fluorine (intrap-F).
Our kits of consumables contain all necessary parts and chemicals for the corresponding mode, such as combustion and reaction tubes, all chemicals and instrument specific wear parts. We do not compromise on quality of the used parts and chemicals – this is the prerequisite of a guaranteed long lifetime of our instruments.
